# French drain vs catch basin: which do you need?

> A catch basin collects water sitting on the surface; a French drain collects water moving through soil. How to tell which your yard has, and when it needs both.

URL: https://reinirvingdrainagecompany.com/guide/french-drain-vs-catch-basin/

Guide

They look similar on an estimate and solve opposite problems. One catches water on top of the ground, the other catches water in it.

## Key takeaways

- Catch basin: surface water that collects at a low point. French drain: water soaking through the soil.
- A test hole a day after rain tells you which kind of water you have.
- On Las Colinas clay, surface water is common; on central Irving sand over clay, perched soil water is common.
- Many yards need both, sharing one solid pipe to the same outlet.

A catch basin is for water sitting on the surface: a puddle that forms in the same low spot after every storm. A French drain is for water moving through the soil: ground that stays soft for days with little or no puddle. Many Irving yards need one, some need both. [Rein Irving Drainage Company](https://reinirvingdrainagecompany.com/) tells them apart with a simple test hole.

## Two different kinds of water

Rain that falls on a yard does one of two things. It soaks in, or it runs across the surface to a low point. Which one happens depends mainly on the soil.

- **Surface water** collects where the ground has no fall, against a raised bed, at the base of a slope, or in a low corner. It is visible, it ponds, and it usually drains away slowly by soaking in or evaporating. A [catch basin](https://reinirvingdrainagecompany.com/catch-basins/) is a grated box set at that low point; water drops in and leaves through solid pipe.
- **Soil water** soaks into sandy topsoil, hits a slower layer of clay underneath, and spreads out along it. The lawn feels spongy and may squelch underfoot, but there is little or no standing water. A [French drain](https://reinirvingdrainagecompany.com/french-drain-installation/) is a fabric-lined trench of stone around a perforated pipe that gives that water an easier path to an outlet.

## The test hole

The quickest way to tell the difference is to dig.

1. Wait for a day after a good rain.
2. Dig a hole about two feet deep in the wettest part of the yard, after an 811 locate if you are going deeper than a shovel’s blade near utilities.
3. Watch the sides. If water seeps in from the walls, especially at the line where sandy soil meets clay, you have soil water. That is French drain ground.
4. If the hole stays mostly dry, the soil below is dense, and water is sitting on top, you have surface water. That is catch basin or [regrading](https://reinirvingdrainagecompany.com/yard-grading/) ground.

The soil survey gives a hint before you dig. The sample point in Las Colinas maps as Ferris and Heiden clay at the surface, where water tends to sit on top. Near Irving Boulevard and in Plymouth Park, the sample points show sandy loam over clay, where water tends to perch underground. These are sample points, not every lot, so the hole is the real answer. The [French drains in clay](https://reinirvingdrainagecompany.com/guide/do-french-drains-work-in-clay-soil/) guide goes deeper.

## Side by side

|  | Catch basin | French drain |
| --- | --- | --- |
| Water it handles | Surface water that collects at one point | Water moving through the soil along a line |
| What you see | A puddle in the same spot after rain | Soft, spongy ground for days; little puddling |
| Where it goes | At the low point | Along the wet strip, often at the top of the clay |
| Pipe | Solid pipe from the box | Perforated pipe in stone, then solid pipe to the outlet |
| Soil fit | Dense surface clay | Sandy topsoil over clay |
| Upkeep | Clear the grate and the sump of the box | Keep the outlet free; flush through cleanouts |
| Typical cost | About $500 to $1,500 each (national budgeting range) | About $25 to $55 per foot (typical Dallas-area range) |

Both need an outlet lower than the yard: a curb core, alley, swale, pop-up emitter or pump. Neither can be aimed at a neighbor; see [where a French drain can drain](https://reinirvingdrainagecompany.com/guide/where-does-a-french-drain-drain/).

## Common mix-ups

- **A French drain under a puddle on hard clay.** The water cannot soak down to the pipe fast enough, so the puddle stays. This is one of the most common reasons a new drain disappoints.
- **A catch basin in a soggy lawn.** The grate sits there dry while the ground around it stays soft, because the water is below the surface.
- **Roof water piped into a French drain.** Downspouts belong in solid pipe, often to a basin or straight to the outlet. See [buried downspouts](https://reinirvingdrainagecompany.com/downspout-drainage/).

## When a yard needs both

Plenty of Irving yards have both kinds of water. A back corner might pond after storms while a side yard stays soggy. The usual answer is one system: a catch basin at the low corner, a French drain along the wet strip, and buried downspouts, all feeding one solid main line to a single outlet. Each part handles its own kind of water, and the shared outlet keeps the cost down. Sizing matters, because the main has to carry everything at once in a short, heavy storm. That is what a [whole-yard drainage system](https://reinirvingdrainagecompany.com/yard-drainage/) is.

## Cost and next step

As a national budgeting range, a catch basin runs about $500 to $1,500 each. A typical Dallas-area range for a standard exterior French drain is about $25 to $55 per foot installed. The outlet often moves the total more than the choice of drain. See [catch basin cost](https://reinirvingdrainagecompany.com/guide/catch-basin-cost-irving/) and [French drain cost](https://reinirvingdrainagecompany.com/guide/french-drain-cost-irving/), or try the [cost tool](https://reinirvingdrainagecompany.com/tools/drainage-cost-estimator/). To have someone look at which kind of water you have, [send photos and your address](https://reinirvingdrainagecompany.com/contact/).

## Questions people ask

### Which is cheaper, a French drain or a catch basin?

A single catch basin with a short solid line is usually cheaper than a long French drain, but the outlet often decides the total for both. As national budgeting ranges, a catch basin runs about $500 to $1,500 each; a typical Dallas-area range for a French drain is about $25 to $55 per foot.

### Can a catch basin dry out a soggy lawn?

Not much. A basin only takes water that reaches its grate. If the lawn is soft because water is held in the topsoil, the water never gets to the grate, and a French drain along the clay line is the better tool.

### Does a French drain need a grate on top?

No. A French drain is usually covered with stone or soil and sod. Where some surface water also collects over the line, a small grated inlet can be added at the low point and tied into the solid outlet pipe.

## Get an estimate

Tell us where the water stands and send a photo. After a site visit, you get a written price.

[(469) 680-8773](tel:+14696808773)

## Related service

[Catch basin installation](https://reinirvingdrainagecompany.com/catch-basins/)

## Related services

- [Catch basin installation](https://reinirvingdrainagecompany.com/catch-basins/)
- [French drain installation](https://reinirvingdrainagecompany.com/french-drain-installation/)
- [Yard drainage systems](https://reinirvingdrainagecompany.com/yard-drainage/)

## Guides

- [French drains in clay soil](https://reinirvingdrainagecompany.com/guide/do-french-drains-work-in-clay-soil/)
- [Catch basin cost in Irving](https://reinirvingdrainagecompany.com/guide/catch-basin-cost-irving/)
- [French drain cost in Irving](https://reinirvingdrainagecompany.com/guide/french-drain-cost-irving/)
- [Do catch basins need cleaning](https://reinirvingdrainagecompany.com/guide/do-catch-basins-need-cleaning/)
- [French drain vs trench drain](https://reinirvingdrainagecompany.com/guide/french-drain-vs-trench-drain/)

## Not sure which kind of water you have?

Send photos taken during or right after rain, plus your address.